What is the point during parking heater installation
This following point describes the structures, working principles during a parking heater installation. For a correct use of the parking heater, please read this carefully before installation and use. So, let me show you these important points before you start.
Application scope
This air heater is not affected by the engine, for in compliance with its heating power under the premise of installation in the following vehicles:
- Various properties of the car (at most 9 people) and its
- Agriculture working
- Boats、steamerand yacht（Limited to diesel heaters）.
- Motor
Heater purpose
- Preheating and defrosting the
- Heating and keeping the following warm:
-Driver and working cabs.
-Freight compartments.
-Passenger and crew compartments.
-Motor homes.
On account of its functional purpose, the heater is not permitted for the following applications:
- Long-term continuous operation, e.g. for preheating and heating of:
-Residential rooms and garages.
-Work huts, weekend homes, and hunting huts.
-Houseboats, etc.
- Heating drying
-Living creatures (people or animals) by blowing hot air directly at the subject objects.
-Blowing hot air into containers.
Safety instructions for application and proper purpose!
- Instructions for installation
-Parts of the structure and other components near the heater must be protected from excess heat exposure and possible contamination from fuel or oil
-The heater must not pose a fire hazard even when it overheats. This requirement is deemed to be fulfilled when adequate clearance to all parts is observed during installation, sufficient ventilation is provided and fire-proof materials or heat plates are used.
-All appropriate precautions must be taken when arranging the heater to minimize the risk of injuries to persons or damage to other property.
● Exhaust system
-The exhaust outlet must be arranged during a parking heater installation so as to prevent any penetration of exhaust fumes into the vehicle interior through the ventilation system, warm air intakes or open windows.
- Combustion air intake
-The air for the heater combustion chamber must not be sucked in from the passenger compartment of the vehicle. The air intake must be arranged or protected in such a way that it cannot be blocked by other objects.
● Heater air intake
-The heater air supply must consist of fresh air or circulated air and be sucked in from a clean area not contaminated by exhaust fumes of the drive machine, the combustion heater or any other source in the vehicle.
-The intake pipe must be protected by a grid or other suitable means.
● Hot air outlet
-The hot air pipes within the vehicle must be arranged or protected in such a way that there is no risk of injury or damage if they are touched.
-The air outlet must be arranged or protected in such a way that it cannot be blocked by any objects.
