Parking heater for motorhome and caravan
Air and water LPG heater is a warm-air heater with integrated hot water boiler. This unit was designed for installation in motorhomes and caravans. t.
Parking heater for motorhome and caravan
Air and water LPG heater is a warm-air heater with an integrated hot water boiler. This unit was designed for installation in motorhomes and caravans. This heater is a combination of hot water and warm air. It can provide hot water for life while heating the compartment. It is allowed to be used during driving. This heater can also use city electricity to start.
we also have a water parking heater, electric car parking heater, and new air and water integrated heater.
Introduction
Air and water LPG heater is a warm-air heater with an integrated hot water boiler. This unit was designed for installation in motorhomes and caravans.
Working Principle
This heater is a combination of hot water and warm air. It can provide hot water for life while heating the compartment. It is allowed to be used during driving. This heater can also use city electricity to start.
Technical Specifications :
| Rated voltage | DC12V 12V/24V | |||
| Max power consumption | 5.6A | |||
| Average power consumption | 1.3A | |||
| Thermal power(W) | 2000 | 4000 | 6000 | |
| Fuel consumption g/h | 160 | 320 | 480 | |
| LPG pressure bar | 30mbar | |||
| Warm air supply m3/h | 287max | |||
| Water tank capacity | 10L | |||
| Max water pump pressure | 2.8bar | |||
| Max system pressure | 4.5bar | |||
| City electric voltage | ～230V | |||
| City electric power (W) | 900 Diesel | 1800 | ||
| City electric power consumption | 3.9A | 7.8A | ||
| Working(environment)temperature | -25℃～+80℃ | |||
| Working height above sea level | ≤1500m | |||
| Net Weight (Only heater) | 15.6 | |||
| Dimensions (mm) | 510×450×300 | |||
Application:
This heater can both heat hot water and compartment of motorhomes and caravans. It must not be installed in buses (vehicle classes M2 and M3) or in vehicles for transporting hazardous goods. It has additional electric heating elements for operation with a mains voltage of 230 V～
Advantages:
Only one heater for both vehicle heating and hot water supply
1. All-purpose: It can be operated with fuel or diesel, electricity or in hybrid mode;
2. Convenience: Automatic temperature control can be realized in conjunction with A/C;
3. High efficiency: self-sufficiency and low energy consumption;
4. The scope of application The integrated heater has high power and high heat efficiency.
5. It is suitable for the supply of hot water and warm air for self-propelled motorhome and trailer motorhome.
About us
Our factory was established in April 1998, located in Harbin, Heilongjiang province. We have an independent R&D organization and has established long-term cooperative relationships with state key universities and colleges like Harbin Institute of Technology, Harbin Engineering University, etc. Annual production is more than 150,000 sets.
| No. | Name | Specifications | Amount |
| 1 | Parking heater | 5KW | 1 |
| 2 | Timer | 1 | |
| 3 | Fuel pump | YB-Ⅰ-12V(24V) | 1 |
| 4 | Muffler | XYQ-Ⅰ | 1 |
| 5 | Wiring harness | 1 | |
| 6 | Water pump | 12V (24V) | 1 |
| 7 | Heater bracket | 1 | |
| 8 | Rubber cushion | 4 | |
| 9 | Muffler bracket | 1 | |
| 10 | Air inlet pipe | Φ20.5/Φ24 L=900 | 1 |
| 11 | Exhaust pipe | Φ24/Φ29.5 L=1000 | 1 |
| 12 | Positive wire of power supply | 1 | |
| 13 | Fuse base | With cover | 1 |
| 14 | Fuse | QY169-5A | 1 |
| 15 | Fuse | 12V/20A(24V/15A) | 1 |
| 16 | Fuse | QY169-25A | 1 |
| 17 | Water pipe | Φ17/Φ27 L=2600 | 1 |
| 18 | Clip | 16-25 | 1 |
| 19 | Spring clip | Φ24×Φ27 | 10 |
| 20 | Oil pump clip | Φ32 | 1 |
| 21 | Oil pipe clip | 8-10 (9-11) | 12 |
| 22 | Exhaust pipe clip | Φ24-28 | 3 |
| 23 | Air inlet pipe fixing clip | Φ24 t=0.5 | 2 |
| 24 | Exhaust pipe fixing clip | Φ27 t=0.8 | 2 |
| 25 | Fuel pipe | GasolineΦ1.5×Φ4(DieselΦ2×Φ5) | 1 |
| 26 | Fuel pipe connector | Φ3.5/Φ9.5(Φ4.1/Φ10.5) | 6 |
| 27 | water pipe connector | Φ18 L=55 | 2 |
| 28 | Special water pipe connector | PPA +33 Φ20×Φ18 L=60 | 2 |
| 29 | Relay | 4141(only for 12V) | 1 |
| 30 | Filter | RYL-Ⅰ(only for diesel) | 1 |
| 31 | Bolt | M6×10 | 1 |
| 32 | Self drilling tapping screw | ST5.5×25 | 6 |
| 33 | Self drilling tapping screw | ST5.5×30 | 5 |
| 34 | Self tapping screw | ST3×20 | 1 |
| 35 | Self tapping screw | ST4×16 | 3 |
| 36 | Spring washer | Φ6 | 2 |
| 37 | Washer | Φ6/Φ12 | 2 |
| 38 | Nut | M6 | 1 |
| 39 | Fuel suction pipe | XYG-Ⅰ 3×400 | 1 |
| 40 | Plug | DJ7041A-2.8-21 | 1 |
| 41 | Nylon cable ties | 4×150 | 1 |
| 42 | Nylon cable ties | 4×200 | 1 |
| 43 | Instruction manual | 1 | |
| 44 | Reducing T | Φ6-Φ10/Φ10 | 1 |
| 45 | Oil pipe clip | 12-14 | 2 |
| 46 | Non-return valve | D18 | 1 |
| 47 | Transition elbow | 2 | |
| 48 | Fixing gear | 2 | |
| 49 | O-ring | 14.8×2.62 | 2 |
| 50 | Bolt | M6×95 | 4 |
Packing Heater Factory
