Liquid Parking Heater 9KW 12V Belief

This belief coolant parking heater can apply for warming the engine and the compartment of each kind of cars, Vans, freight vehicles, and coaches. There is another engine coolant in this series, Coolant parking heater 5KW,

Important notes for users:

Pls ensure that the Battery used can provide 30A INSTANTANEOUS CURRENT when starting the heater, Recommended 60AH battery at least.

Be sure to read the instruction manual carefully before installation and use.

1. Please check the vent on the fuel tank when doing installation
2. Fuel pipe after clipping(must use blade, Scissors or pliers are forbidden) should ensure not affect fuel flow amount.
3. Attention: The cooling liquid in use must be in conformity with the specifications of the automobile manufacturers. Anti-freezer not only can improve anti-freezing quality of the cooling liquid, but also can prevent corrosion. Therefore DO NOT add water in any case and only add cooling liquid in replacement.

4. If the temperature of cooling liquid is higher than 75°C, the heater can only be started after the temperature is reduced through pump circulation.

Power Supply

Heater power leads (positive and negative line) must be connected to the 12V/24V batteries directly. Battery more than 2 years which lack of electric frequently should be changed a new one in order to ensure normal use of the heater.

Fuel Supply

The fuel for the heater can be from the fuel tank in the car or from optional 5L independent fuel tank. The fuel pump is used for transmission of fuel and regulation of supply quantity of fuel.

Fuel pump installation

The optimum installation angle for the fuel pump is from 15 to 35 degrees, the allowable installation angle is from 35 to 90(max) degrees.

Attention for the fuel level, see attached photos.

Max.fuel level – 2
Min.fuel level – 3
Fuel inlet level – 4

Fuel standard

Gasoline should accord with standard DIN EN288
Diesel should accord with standard DIN EN590

Note: Fuel brand which used should meet the requirements of low temperature in winter. Biofuel is forbidden!

---

About us

Our factory was established in April 1998, located in Harbin, Heilongjiang province. We have an independent R&D organization and has established long-term cooperative relationships with state key universities and colleges like Harbin Institute of Technology, Harbin Engineering University, etc. Annual production is more than 150,000 sets. We exported to Europe, the United States, Canada, Japan, and etc 60 countries. We have sole dealers in AU and UK and Denmark.