External temperature sensor for Belief air heaters
External temperature sensor for Belief air heaters
The external temperature sensor belongs to the additional accessory of the parking heater. you could place it on the one-meter away from the heater and the sensor would test the temperature around. It will automatically test the temperature and change the working state of the heater.
For example, you have set the temperature of heating, when the temperature reaches the set temperature. the sensor will stop the heating, and when the temperature is lower than 20, the heater will start again.
we also have a water parking heater, belief air parking heater, electric car parking heater, and 2019 new air and water integrated heater.
NO.2 is the external temperature sensor, it can be placed where you want to test and automatically control the temperature.
1-LCD control switch
2-External temperature sensor
3-Recirculating air inlet (minimum 150cm2)
4-Heat pipe
5-Heat outlet
6-Smoking cowl
About us
Our factory was established in April 1998, located in Harbin, Heilongjiang province.
We have an independent R&D organization and has established long-term cooperative relationships with state key universities and colleges, such as Harbin Institute of Technology, Harbin Engineering University, etc.
Annual production is more than 150,000 sets.
| No. | Name | Specifications | Amount |
| 1 | Parking heater | 5KW | 1 |
| 2 | Timer | 1 | |
| 3 | Fuel pump | YB-Ⅰ-12V(24V) | 1 |
| 4 | Muffler | XYQ-Ⅰ | 1 |
| 5 | Wiring harness | 1 | |
| 6 | Water pump | 12V (24V) | 1 |
| 7 | Heater bracket | 1 | |
| 8 | Rubber cushion | 4 | |
| 9 | Muffler bracket | 1 | |
| 10 | Air inlet pipe | Φ20.5/Φ24 L=900 | 1 |
| 11 | Exhaust pipe | Φ24/Φ29.5 L=1000 | 1 |
| 12 | Positive wire of power supply | 1 | |
| 13 | Fuse base | With cover | 1 |
| 14 | Fuse | QY169-5A | 1 |
| 15 | Fuse | 12V/20A(24V/15A) | 1 |
| 16 | Fuse | QY169-25A | 1 |
| 17 | Water pipe | Φ17/Φ27 L=2600 | 1 |
| 18 | Clip | 16-25 | 1 |
| 19 | Spring clip | Φ24×Φ27 | 10 |
| 20 | Oil pump clip | Φ32 | 1 |
| 21 | Oil pipe clip | 8-10 (9-11) | 12 |
| 22 | Exhaust pipe clip | Φ24-28 | 3 |
| 23 | Air inlet pipe fixing clip | Φ24 t=0.5 | 2 |
| 24 | Exhaust pipe fixing clip | Φ27 t=0.8 | 2 |
| 25 | Fuel pipe | GasolineΦ1.5×Φ4(DieselΦ2×Φ5) | 1 |
| 26 | Fuel pipe connector | Φ3.5/Φ9.5(Φ4.1/Φ10.5) | 6 |
| 27 | water pipe connector | Φ18 L=55 | 2 |
| 28 | Special water pipe connector | PPA +33 Φ20×Φ18 L=60 | 2 |
| 29 | Relay | 4141(only for 12V) | 1 |
| 30 | Filter | RYL-Ⅰ(only for diesel) | 1 |
| 31 | Bolt | M6×10 | 1 |
| 32 | Self drilling tapping screw | ST5.5×25 | 6 |
| 33 | Self drilling tapping screw | ST5.5×30 | 5 |
| 34 | Self tapping screw | ST3×20 | 1 |
| 35 | Self tapping screw | ST4×16 | 3 |
| 36 | Spring washer | Φ6 | 2 |
| 37 | Washer | Φ6/Φ12 | 2 |
| 38 | Nut | M6 | 1 |
| 39 | Fuel suction pipe | XYG-Ⅰ 3×400 | 1 |
| 40 | Plug | DJ7041A-2.8-21 | 1 |
| 41 | Nylon cable ties | 4×150 | 1 |
| 42 | Nylon cable ties | 4×200 | 1 |
| 43 | Instruction manual | 1 | |
| 44 | Reducing T | Φ6-Φ10/Φ10 | 1 |
| 45 | Oil pipe clip | 12-14 | 2 |
| 46 | Non-return valve | D18 | 1 |
| 47 | Transition elbow | 2 | |
| 48 | Fixing gear | 2 | |
| 49 | O-ring | 14.8×2.62 | 2 |
| 50 | Bolt | M6×95 | 4 |
Packing Heater Factory
