Air and water LPG heater is a warm-air heater with an integrated hot water boiler. This unit was designed for installation in motorhomes and caravans.
The caravan diesel heater is a warm-air heater with an integrated hot water boiler. This heater is a combination of hot water and warm air, which can provide hot water for life while heating the compartment. It is allowed to be used during driving. This heater can also use city electricity to start.
we also have water parking heaters, air parking heaters, electric car parking heaters, and new combi heaters.
The caravan diesel heater is a warm-air heater with an integrated hot water boiler. We designed this combi heater for installation in motorhomes and caravans.
This heater is a combination of hot water and warm air function, which can provide hot water for life while heating the compartment. Clients can use it during driving. This heater can also use city electricity to start.
Rated Voltage | DC12V 12V | |||
Operating Voltage Range | DC10.5V~16V | |||
Short-term Maximum Power Consumption | 8-10A | |||
Average Power Consumption | 1.8-4A | |||
Fuel type | Diesel | |||
Fuel Heat Power (W) | 2000 | 4000 | ||
Fuel Consumption (g/H) | 240/270 | 510/550 | ||
Quiescent current | 1mA | |||
Warm Air Delivery Volume m3/h | 287max | |||
Water Tank Capacity | 10L | |||
Maximum Pressure of Water Pump | 2.8bar | |||
Maximum Pressure of System | 4.5bar | |||
Rated Electric Supply Voltage | ~220V/~110v | |||
Electrical Heating Power | 900W | 1800W | ||
Electrical Power Dissipation | 3.9A/7.8A | 7.8A/15.6A | ||
Working (Environment) Temperature | -25℃~+80℃ | |||
Working Altitude | ≤1500m | |||
Weight (Kg) | 15.6Kg(without water) | |||
Dimensions (mm) | 510×450×300 | |||
Protection level | IP21 |
This heater can both heat hot water and a compartment of motorhomes and caravans. You must not install the combi heater in buses (vehicle classes M2 and M3) or in vehicles for transporting hazardous goods. It has additional electric heating elements for operation with a mains voltage of 230V~
Only one heater for both vehicle heating and hot water supply
1. All-purpose: It can be operated with fuel or diesel, electricity, or in hybrid mode;
2. Convenience: Automatic temperature control can be realized in conjunction with A/C;
3. High efficiency: self-sufficiency and low energy consumption;
The scope of application The integrated heater has high power and high heat efficiency.
It is suitable for the supply of hot water and warm air for self-propelled motorhomes and trailer motorhomes.
Our factory was established in April 1998, located in Harbin, Heilongjiang province. We have an independent R&D organization and have established long-term cooperative relationships with state key universities and colleges like Harbin Institute of Technology, Harbin Engineering University, etc. Annual production is more than 150,000 sets.
Packing list | ||||
No. | Name | Specifications | Number | Order code |
1 | Instructions | YFJH-6E/1C main engine | 1 | 22020203400 |
2 | Heater mainframe | YFJH-6E/1C | 1 | 4T300612C01 |
3 | Crosshead tapping nail | ST5*25 | 5 | 12050016100 |
4 | 12VPower cord | 4m | 1 | 12031101600 |
5 | External temperature sensor | NTC10K | 1 | 31011102100 |
6 | External temperature sensor lead | L=4m | 1 | 12031100500 |
7 | LCD Switch | MNB-V-FY | 1 | 31011104400 |
8 | Instructions | LCD Switch MNB-V-FY | 1 | 22020202600 |
9 | Crosshead tapping nail | M3*10 | 4 | 12050002400 |
10 | Cross countersunk head and flat tail self-tapping nail | M3*6 | 1 | 12050016000 |
11 | LCD Switch Lead | 6m | 1 | 12031101500 |
12 | Controller Cover | 260×75×22 | 1 | 12021100900 |
13 | Crosshead tapping screw | ST5×16 | 4 | 12050007300 |
14 | External wire clamp sleeve connector | G1/2-φ10
G1/2-φ8 |
2 | 12011104300 |
15 | cable ties | 4×200 | 10 | 21990000000 |
16 | Intake and exhaust body | φ110×108 | 1 | 12011101900 |
17 | Intake and exhaust hood | φ110×34 | 1 | 12021102000 |
18 | Gasket | φ104.5×φ73×2.4 | 1 | 12041101800 |
19 | Clamp | φ55 | 2 | 31011102700 |
20 | German clamp | 70-90 | 2 | 12050200700 |
21 | Fixed clip for the intake pipe | φ80 | 1 | 12021102700 |
22 | Crosshead tapping screw | ST3.5×25 | 9 | 12050015600 |
23 | Exhaust pipe | φ55/φ50×950 | 1 | 12060007700 |
24 | Intake pipe | φ80/φ76×1000 | 1 | 12060007800 |
25 | Vent | CFK-φ60-ⅢFlexibility adjustable | 4 | 31011104700 |
26 | Pressure relief valve | 0.5MPa | 1 | 12501101000 |
27 | Antifreeze valve | 1~4℃ | 1 | 31011106600 |
28 | German clamp | φ50-φ70 | 4 | 12010005100 |
29 | Bellows snap | φ60 | 4 | 12021102600 |
30 | Oil Pump Assembly | YB-Ⅰ-12V Buffer | 1 | 33000007600 |