air parking heater works, cold air is sucked into the air passage by the heat supplying fan and blown out when it becomes hot
Belief 2KW diesel air parking heater is a smart parking heater, clients can select to control the heater either by knob switch, LCD switch or App on smart phone, it all depends on the customer’s usage habits. Clients can downloaded the apps from Appstore, it is available for both Android and ISO system.
Pls check the instruction for Bluetooth function in the download section. There is also Gasoline version for this 2KW air parking heater.
The heater is divided into diesel type and gasoline type. It is controlled by a small single-chip microcomputer, and the cold air is inhaled by the heating fan wheel. After heating, it is blown into the space that needs to be heated to achieve the independent heating of the space.
we also have water parking heater, air parking heater, 4kw diesel combi heater, diesel stove heater, diesel burning stove, etc.
The air parking heater can be used for space heating in caravans, bed cars, electric cars, trucks, yachts, house etc.
Be sure to read the instruction manual carefully before installation and use.
Power Supply
Heater power leads (positive and negative line) must be connected to the 12V/24V batteries directly. Battery more than 2 years which lack of electric frequently should be changed a new one in order to ensure normal use of the heater.
Fuel Supply
The fuel for the heater can be from the fuel tank in the car or from optional 5L independent fuel tank. The fuel pump is used for transmission of fuel and regulation of supply quantity of fuel.
Fuel pump installation
The optimum installation angle for the fuel pump is from 15 to 35 degrees, the allowable installation angle is from 35 to 90(max) degrees.
Attention for the fuel level, see attached photos.
Max.fuel level – 2
Min.fuel level – 3
Fuel inlet level – 4
Fuel standard
Gasoline should accord with standard DIN EN288
Diesel should accord with standard DIN EN590
Note: Fuel brand which used should meet the requirements of low temperature in winter. Biofuel is forbidden!
Thermal power (W) |
2000W |
Fuel type |
Diesel |
Rated voltage |
12V |
Fuel consumption (l/h) |
0.14 ~ 0.27 |
Rated power (W) |
14~29 |
Working temperature |
-40℃~ +35℃ |
Working altitude |
≤ 5000m |
Weight (kg) |
2.6 |
Dimensions (mm) |
323×120×121 |
CTN size (cm) |
49×49×18 |
Express(UPS/Fedex) Weight (kg) |
9 |
External tem sensor (optional) |
Available |
GSM control (optional) |
Not limited by distance and obstacles |
Under either of the above circumstances, DO NOT use the heater even at the stand-by state.
Our factory was established since 1998, located in Harbin, Heilongjiang province. We focus on the heating and cooking solutions for caravans and motorhomes, we have an independent R&D organization and have established long-term cooperative relationships with state key universities and colleges like Harbin Institute of Technology, Harbin Engineering University, etc. Annual production is more than 150,000 sets.
Packing List | ||||||||
No. | Name | Specification | QTY | Purchase code | Knob switch | LCD switch | Knob switch and GSM controller | LCD switch and GSM controller |
1 | Heater | 12V Gasoline( ) | 1 | 3W200212Q01 | √ | √ | √ | √ |
12V Diesel ( ) | 3W200212C01 | √ | √ | √ | √ | |||
24V Diesel ( ) | 3W200224C01 | √ | √ | √ | √ | |||
2 | Gasket | 81×110×2 | 1 | 12040001800 | √ | √ | √ | √ |
3 | Wiring harness | FJH-2 | 1 | 12030300301 | √ | √ | √ | √ |
4 | Control switch | KG-Ⅱ-F( ) | 1 | 31010203000 | √ | ⚪ | ⚪ | ⚪ |
KG-Ⅱ-F-GSM( )
GSM controller() |
31010203100 | ⚪ | ⚪ | √ | ⚪ | |||
12500005000 | ⚪ | ⚪ | √ | ⚪ | ||||
MNB-Ⅳ-F( ) | 31010000900 | ⚪ | √ | ⚪ | ⚪ | |||
MNB-Ⅳ-F-GSM( )
GSM controller() |
31010001000 | ⚪ | ⚪ | ⚪ | √ | |||
12500005000 | ⚪ | ⚪ | ⚪ | √ | ||||
5 | Fuel pump | 12V( ) | 1 | 33000007600 | √ | √ | √ | √ |
24V( ) | 33000007700 | √ | √ | √ | √ | |||
6 | Fuel pump clip | φ32×29 | 1 | 12990007300 | √ | √ | √ | √ |
7 | Fuel pump connection wire L=6800 | 1 | 12030005701 | √ | √ | √ | √ | |
8 | Filter | Only diesel | 1 | 33000000400 | √ | √ | √ | √ |
9 | Fuel pipe | φ5×1.5 L=1200 | 1 | 12060004600 | √ | √ | √ | √ |
10 | Fuel pipe | Φ4×1 L=6800 | 1 | 12060004200 | √ | √ | √ | √ |
11 | Fuel pipe joint | φ4.1/10.5 L=40 | 4 | 12060003800 | √ | √ | √ | √ |
12 | Fuel pipe joint | Φ3.5/9.5 L=40 | 2 | 12060003900 | √ | √ | √ | √ |
13 | Clip | φ9~11(10) | 9 | 12010004200 | √ | √ | √ | √ |
14 | Clip | Φ8~10(9) | 3 | 12010004300 | √ | √ | √ | √ |
15 | Oil suction pipe | XYG-Ⅱ φ5×600 | 1 | 31000000500 | √ | √ | √ | √ |
16 | Reducing T | 10-6-10 | 1 | 12020015700 | √ | √ | √ | √ |
17 | Fuel pipe clip | φ12/14 | 2 | 12010004600 | √ | √ | √ | √ |
18 | Air inlet pipe | φ23/26 L=500 | 1 | 31010302600 | √ | √ | √ | √ |
19 | Air inlet pipe clip | φ16/25 | 1 | 12010004500 | √ | √ | √ | √ |
20 | Air inlet pipe fixing clip | 150×16 t=0.5 | 2 | 29010003700 | √ | √ | √ | √ |
21 | Exhaust pipe | φ22/28 L=700 | 1 | 31010302700 | √ | √ | √ | √ |
22 | Exhaust pipe clip | φ22/26 | 1 | 12010005000 | √ | √ | √ | √ |
23 | Exhaust pipe fixing clip | φ27 | 2 | 29010002300 | √ | √ | √ | √ |
24 | Washer | φ6/18 | 4 | 12010006500 | √ | √ | √ | √ |
25 | Nut | M6 | 4 | 12050003400 | √ | √ | √ | √ |
26 | Self-drilling tapping screw | ST5.5×30 | 5 | 12050003000 | √ | √ | √ | √ |
27 | Cable ties | 4×200 | 10 | 21990000000 | √ | √ | √ | √ |
28 | Heater bracket | 200*180*1.5 | 1 | 29010001400 | √ | √ | √ | √ |
29 | Clip | φ50~70 | 2 | 12010005100 | √ | √ | √ | √ |
30 | Grill | φ60 | 1 | 12020601100 | √ | √ | √ | √ |
31 | Bellows | φ60×1000 | 1 | 12060000601 | √ | √ | √ | √ |