Is your parking heater installed correctly?
The weather has gradually turned cold, and many drivers have begun to install heaters. However, according to the feedback of drivers recently, some problems may occur after the installation for a period of time.Then the driver will think that there is a quality problem with the heater, but it may also be caused by the non-standard installation of the heater during the installation process.
in the process of installation, too much foam glue was used when fixing the plate, which made the foam glue flow into the heat exchanger. The foam glue was flammable, and in the running process of parking heater, it was easy to cause high temperature, which caused the parking heater to catch fire and caused serious safety risks.
In the process of installation, fixed plate outer ring can use a small amount of foam to achieve the sealing effect, remember: excessive use, blockage can be.
What should we pay attention to when installing motorhome parking heater
Installation position of motorhome parking heater
Heaters are applicable and allowed to be used in the passenger compartment of the vehicle.
Heater flanges and assembled flange seals can be used to directly install the heater on the appropriate parts of the bottom or rear wall of the vehicle.
Motorhome
In motorhome, the heater is mainly installed in the room or luggage.If it cannot be installed in the passenger compartment or luggage of the vehicle, the heater can also be fixed under the floor of the vehicle that will not be splashed by water.
Heater is located in front of driver’s seat
Heater is located between driver’s seat and driver’s seat.
The heater is located under the floor
The heater is located in the living room of the motorhome.
The heater is located in the luggage
Cars/large cars
In sedans/large sedans, heaters are installed primarily in the passenger compartment or trunk of the vehicle.If it cannot be installed in the passenger compartment or luggage of the vehicle, the heater can also be fixed under the floor of the vehicle that will not be splashed by water.
1.Heater is located in front of driver’s seat
2.Heater is located between driver seat and driver seat
3.The heater is located under the floor
4.Heater is located under the backseat
5.The heater is located in the luggage
Excavator (diesel heater only)
In the excavator, the heater is mainly installed in the driving room.If it cannot be installed in the driving room, the heater can also be installed in the loading box outside the driving room.
1.The heater is located in the box of the driver’s seat
2.The heater is located on the rear wall of the cab
3.The heater is located in the protective box
Trucks (diesel heaters only)
In trucks, heaters are installed primarily in the cockpit.If it is not possible to install the heater in the cockpit, you can also install the heater in the toolbox or loading box.
1.Heater is located at the foot of driver’s side seat
2.The heater is located on the rear wall of the cab
3.The heater is located under the back of the driver’s seat
4.The heater is located in the tool box
Allowable installation Angle
As shown, it is recommended to install the heater at a normal Angle.According to the different installation conditions, according to the chart, will most heater can be installed at 30 ° (flow down!)Or revolve around its long axis up to 90 ° (exhaust casing horizontal, plug pointing up!)
Note:
In heating operation, as shown in the normal installation Angle and the vehicle of the largest installed under the influence of the oblique position Angle can be in every direction shift + 15 ° and not affect the function of the equipment.
