when bluetooth diesel air parking heater works, cold air is sucked into the air passage by the heat supplying fan and blown out when it becomes hot, so as to form another heating system that independent from the original heating system of the vehicles.
This bluetooth diesel air parking heater is not affected by the engine, for in compliance with its heating power under the premise of installation. This heating system uses the gas or diesel as the fuel, after heat, the exchanger, the hot air through the air blower, arrives at the compartment, storehouse, equipment, therefore, achieve the purpose that heats and removes the frost to them.
Application:
Various properties of the car (at most 9 people) and its trailer.
Building and machinery.
Agriculture working machinery.
Boats、steamer and yacht(Limited to diesel heaters).
Motorhomes.
We also have air parking heater(2KW, 2.2KW, 4KW, 5KW), water parking heater, electric car parking heater, and new plateau combi heater.
Product Description
Product name | 4KW car parking heater 12V |
Brand | TuiTe |
Fuel | Diesel |
Fuel consumption | 0.18-0.54(l/h) |
Rated voltage | 12V/24V |
Run time consumption power | 9~40(w) |
Heating value | 1300~3800(w) |
Working temperature | -40℃~+20℃ |
Working height above sea level | ≤1500m |
weight of Main Heater | 4.5kg |
Mobile phone control(Optional) | No limitation(GSM network coverage) |
Remote control(Optional) | Without obstacles≤800m |
Advantages:
About us
Our factory was established in April 1998, located in Harbin, Heilongjiang province. We have the independent R&D organization and has established long-term cooperative relationships with state key universities and colleges like Harbin Institute of Technology, Harbin Engineering University, etc. Annual production is more than 150,000 sets.
We exported this new bluetooth diesel air parking heater Europe, the United States, Canada, Japan, and etc 60 countries. We have sole dealers in AU and UK and Denmark.
No. | Name | Specifications | Amount |
1 | Parking heater | DC12V() /DC24V() | 1 |
2 | Main wiring Bundle | DC12V() /DC24V() | 1 |
3 | Oil pump | DC12V() /DC24V() | 1 |
4 | Oil pump connection wire | L=6800mm | 1 |
5 | Filter | 1 | |
6 | Oil pipe | Φ2/ Φ5 L=8000 | 1 |
7 | Control switch | DC12V() /DC24V() | 1 |
8 | Inlet air pipe | Φ23/ Φ26 L=750 | 1 |
9 | Exhaust pipe | Φ22/ Φ28 L=700 | 1 |
10 | Gasket | 81*110*P | 1 |
11 | Reducing tee | 1 | |
12 | Oil pump clip | D=32 | 1 |
13 | Inlet air pipe clip | Φ16/ Φ25 | 1 |
14 | Exhaust pipe clip | Φ22/ Φ26 | 1 |
15 | Inlet air pipe fixing clip | Φ24 | 2 |
16 | Exhaust pipe fixing clip | Φ27 | 2 |
17 | Oil pipe joint | Φ4.1/ Φ10.5 L=50 | 6 |
18 | Oil pipe clip | Φ9/ Φ11(10) | 12 |
19 | Oil pipe clip | Φ12/ Φ14 | 2 |
20 | Washer | Φ6 | 4 |
21 | Nut | M6 | 4 |
22 | Self-drilling tapping screw | ST5.5*25 | 4 |
23 | Self-drilling tapping screw | ST5.5*30 | 1 |
24 | Self-tapping screw | ST4*16 | 1 |
25 | Self-tapping screw | ST3*30 | 4 |
26 | Cable ties | 200mm | 10 |
27 | Oil suction pipe | Φ5*600 | 1 |
28 | Operation manual | 1 |